03. Purchase Ordering

Created by Migration Bot, Modified on Fri, 23 Oct at 11:20 AM by Migration Bot

Originally written by John Hardwick, last updated Sept 22, 2023, on the Swan Retail knowledge base (FRS).


A quick reference guide to processing purchase orders within SwanFRS

Click to Download a PDF version of this document

FRS-03. Purchase Ordering-030823-124958.pdf

Videos

By following this document you will be able to create purchase orders, adjust, issue, process an acknowledgement and book a supplier delivery slot. 

The aim of these training notes is to give you a quick reference booklet following the training session, and you are encouraged to make your notes within these pages.

This document covers the very basic process of processing a purchase order. There are a myriad of permutations and possibilities relating to this not covered by this guide, therefore it is recommended this be the start of your familiarisation process with purchase order management. Continue to use the test systems to explore the system and to scenario test.

The basic flow for creating a purchase order is as shown below. This section shows this process from an SwanFRS operating perspective.

.

There are two forms of purchase order.

  • Stock Orders - Orders raised to replenish backing stock or for showroom /display purposes. SwanFRS refers to this form of order as an Internal Order, and the order is being raised internally by the retailer.

  • Special Orders - Orders raised to fulfil customer demand = Within the Furniture trade this form of order is referred to as a back-to-back purchase order as it is created off the back of the sales order.

Stock Orders

Demand items for special orders are created off the back of the sales order, however when ordering goods on behalf of the retailer there is no sales order, therefore an alternative way of creating demand is required. This is achieved by raising an Internal Order.

Creating the Internal Order

Menu Location: Purchasing > Create Internal Order

  • Internal Orders (IO's) share their numbering sequence with Sales Orders (SO's)

  • Allows mixing of suppliers on one order

  • Shows costs not selling prices

  • Can discount / mark as for showroom use / hide from sales enquiries

  • Can create and leave open

  • Can copy contents from a previously created IO

Add products to the order via, ADD or Add Products from the side panel.

Build the ‘shopping list’ as appropriate.

Click ACCEPT to complete the order,

Ticking the Create Purchase Order checkbox creates the PO immediately.

Unticking pushes demand into Create Purchase Orders.

IO's can be amended post Accept where needed.

Viewing Internal Orders

Menu Location: Purchasing > Find Purchase Orders

It is possible to sell into an Internal Orders once ACCEPTED.

Special Orders

Special orders or back-to-back orders are created off the back of the sales order or an internal order if the Create PO check box wasn’t ticked at time of acceptance.

Purchase Orders Creation

Menu Location: Purchasing > Create Purchase Orders

Select the scope of the search by adjusting the location filters.

There are two data presentation styles

Supplier

This view collates all ‘demand’ by supplier and is useful if a minimum order quantity or value is required.

  • Click in Supplier to view demand

  • Demand cannot be filtered or part ordered.

  • Can be specific as to which suppliers to raise PO’s for

Sales / Internal Order

This view lists all sales orders with ‘demand’ items (items requiring the purchase of products).

  • Summary shows one line per PO / Detailed shows each demand item separately.

  • Choose which orders / products to create POs for.

  • Free Stock indicates potential match in stock, so why order.

  • Order Before shows ‘slack’ in the system - you can delay ordering until this date without affecting the delivery date.

  • Take care creating POs for NOT ATUHORISED or ON HOLD sales orders

Creating the PO(s)

Click ORDER to process selected lines.

Confirm the location of order creation and expected supplier delivery location.

There are three types of collation

  • SALES / INTERNAL ORDERS - Click if you want one PO per SO - true back-to-back order processing.

  • SUPPLIER SALES LOCATION - Choose if you would like to collate by supplier within ordering location.

  • ENTIRE SUPPLIER - Choose if you wish to collate by supplier within destination location

Note collation may change expected delivery to customer dates and only will be performed for suitable orders. For example, direct home delivery orders cannot be collated.

Progressing the PO

Irrespective of how the purchase order was raised, once in the system it is progressed using the following processes.

Finding PO

Menu Location: Purchasing > Find Purchase Orders

  • Click on PO Number to view PO details

  • Use check boxes to print / send and book in

Adjusting the PO

Following on from the Find PO screen, clicking in the PO shows the detail of the PO.

  • Use EDIT to change the PO control data

  • ALTERNATIVE SUPPLIER is only available for POs that have not been ‘sent’ to the supplier

  • SALES ORDER VIEW displays any linked Sales / Internal Orders at line level. - option to drill into the sales order, subject to permission, and then back out.

  • BOOK IN SELECTED LINE allows the warehouse to know what’s due in when.

  • PO Status NOT SENT, SENT, CANCELLED

  • PO Status will auto revert to NOT SENT if any order line is amended.

  • Click to amend the quantity or cost of the line.

  • Click to cancel a line - this does not kill the SO item if linked to a sale.

  • Pack sizes and description are shown if set at product level.

  • Possible to print labels from side panel or include in PO print issued to supplier.

  • Clicking Acknowledge from the side panel allows update to the expected delivery status

  • POs can be in the supplier's base currency.

Issuing the PO

The supplier is unaware of the purchase order until it is sent to them.

When viewing the PO list or the individually, selecting Send Purchase Orders on the side menu issues the PO either via a print / PDF attachment on an email or via electronic means, to the supplier.

Changes to the composition of the PO post ‘send’ will change the SENT status to NOT SENT.

  • POs may have a small company logo in the top left or as a banner across the page.

  • Changes to PO create ‘revisions'

  • Changes are recorded and shown in the Print Audit on the side panel.

  • POs can be ‘sent’ as many times as needed.

Acknowledging the PO

When viewing the purchase order detail, it is possible to record a supplier’s acknowledgement. Click the Acknowledge on the side panel to do this.

  • When processing a second or subsequent acknowledgement, click the AMEND badge.

  • Summary collates like products

  • Detailed shows one row per stock item, including linked Sales Order

  • Acknowledgements can be processed against the entire order or at line level.

    • Header - enter the reference / advised date in the top section of the page, then tick the lines to be acknowledged via the A/N check box.

    • Line level - specify / change the cost, advised date, and reference per line.

  • Advised is expected date of arrival

  • Confirmed is guaranteed date of arrival.

  • Advised dates are the date the goods are expected, NOT the acknowledgement date.

  • Acknowledging displays the ACKNOWLEDGED badge to the right of the SENT badge.

Updating the acknowledgement impacts on linked sales orders, possibly sending alerts to the designated contact advising them of date changes.

Booking In Diary

Menu Location: Purchasing > Booking In Diary

It is possible to book in the entire PO or a line within the PO (Not split lines) for receipt on a given date.

This is via the BOOK IN SELECTED LINES, BOOK IN SELECTED PURCHASE ORDERS badges (and side menu options) or via the booking in diary program.

Select the appropriate PO(s) or order line(s) and click the relevant badge / option. This produces a confirmation window

Click BOOK to view the booking in diary.

  • Ensure you’re booking into the correct location

  • Capacity will show it ‘put away timings' are set against the product and capacities set against the location. This is a traffic light indicating how close to capacity the location is on that day.

  • Updates the PO.

  • Allows staffing levels to be managed.

  • Produces supplier delivery performances.

Files from the Confluence page

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article