Originally written by John Hardwick, last updated Apr 30, 2026, on the Swan Retail knowledge base (FRS).
Overview
This routine allows the set-up and maintenance of ‘terms and conditions' which are printed at the foot of the Banner version of the Sales Order Acknowledgement.
Menu Location: System Admin > Sales > Set Up Terms And Conditions
There are two modes of operation controlled via the Set Up Roles routine.
|
SETUP_SOA_TERMS_ALL |
Operators with this role are allowed to set T&Cs for all visible locations. |
|
SETUP_SOA_TERMS_LOCAL |
Operators with this role can only change location specific roles for the location they are operating from. |
The initial load page displays all current T&Cs in a data grid, listing them in Header within Record Type sequence.
Filtering in the top right of the screen allows the operator to focus in on the T&Cs they require.
|
Filter By Record Type |
Select From the following
|
|
Code |
Enter free format text to be used as a filter when searching for specific T&Cs |
-
Click the FIND button or Find on the side panel to generate a new record.
-
Click the NEW button or New on the side panel to generate a new record.
-
Click the CLOSE button, or Back option on the side panel to leave the page (or select another option from the menu)
It is possible to sort the data grid A to Z or Z to A by clicking either the Record Type, Header or Sequence
Per record, it is possible to
-
Click the edit icon to amend an existing record.
-
Click the clone icon to duplicate the record.
-
Click the delete icon to remove the existing record.
Clicking the NEW button or he edit icon opens the T&C detail page.
New Records
When creating a new record, the operator will be requested to choose a record type and then, dependant upon the record type selected, specify the appropriate link point.
For example, choosing location will require the selection of a location from the pick list provided. Pick lists are provided for product groups, SKU and SKU options with a free format type inbox for the model number (supplier's stock reference)
It is not possible to save the new record without choosing the link point.
It is possible to change the link point when amending the record, but not possible to change the record type.
Record Details.
|
Item |
Description |
|
Record Type |
Select From the following
|
|
Header |
Specify the group name or heading, which will act as a title and a grouping for one or more ‘detail’ row. |
|
Image Name |
Optionally, define a path for an image to be printed alongside the T&C. Images when held locally should be located within the ‘pictures’ folder path as specified in the Set Up Applications Parameters routine. Images are not scaled when printing - for best results… Header Only images should not exceed 800 pixels wide x 80 pixels deep at a bit depth of 32. Row specific images should not exceed 41 wide x 33 deep (Pixels) at a bit depth of 32. Crystal reports cannot print URLs therefore images must be held locally If an image is assigned to a Header Only record, the Header Name is not printed on the SOA. |
|
Print Index |
Allows indexing of T&Cs Can be blank Only needed if you wish to show a printed index. Use spaces to force a gap between the print index and the detail narrative |
|
Sequence |
Only needed if more than one record exists for a particular header. This controls the print order of the details. |
|
Heading Only |
Tick of the Header text is to form a title section. Where ticked, the Details section is omitted and cannot be specified. It is possible to have multiple records with the same Header for the same Record Type however it is only possible to have one Header Only per combination. |
|
Dual Column |
Tick if the T&C is to form part of the dual column T&C print on the Sales Order Acknowledgement. Unticked shows the T&C record in a single column. |
|
Bullet |
Tick if the Header / Details are to be prefixed with a bullet (Dot) |
|
Box |
Tick if the Header / Details are to be printed within a box. |
|
Indent |
Tick if the Details are to be indented. |
|
Line |
Tick if the T&C will have a line printed under the text. |
|
Bold |
Tick if the text is to be shown in a bold font. |
|
Underscore |
Tick if the text is to be underscored. |
|
Collection Only |
Tick if the text is to be displayed when a customer has a ‘to collect' item on the sales order. |
|
Italic |
Tick if the text is to be italicized. |
|
Background Colour |
Select from the following
Blue and Black force the white text, and therefore the chosen Font colour will always be white irrespective of setting. |
|
Font |
Select from the following
|
|
Print Type |
Select from the following
|
Click the SAVE to save the changes to file and return to the main T&C listing.
Click SAVE AND CONTINUE to record the screen and remain on the page with the SAME data set, thus allowing modifications to the data before saving a new record.
Clicking CANCEL aborts the change and returns to the main T&C listing
Large Scale Loads
At time of implementation or if there are numerous T&Cs to load (and subject to fair use) Swan will import the terms and conditions were constructed in the linked spreadsheet.
|
SwanFRS version 1207 to 1211 |
1214 onwards |
|---|---|
| SOATerms Examples.xlsx | SOATerms Examples version 1212.xlsx |
Once completed, please email to Swan Support for installation into your database, indicating if this is to be loaded in live or test.
Files from the Confluence page
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article