Wi-Fi Warehousing (1214 onwards)

Created by Migration Bot, Modified on Fri, 23 Oct at 2:30 PM by Migration Bot

Originally written by John Hardwick, last updated May 28, 2026, on the Swan Retail knowledge base (FRS).


Click to view / download a PDF of this document

FRS-Wi-Fi Warehousing (1214 onwards)-280526-063423.pdf

Overview

This document provides an overview of the Wi-Fi scanner application.

The application is designed to work with a Wi-Fi enabled scanner capable of running an internet browser with a colour touch screen (Minimum resolution of 640 x 480 pixels).

This software was tested on a Zebra TC210K scanner, other devices are available and we are not solely recommending this device.

image-20240912-145905.png

Configuration

Application Controls

Menu Location: System Settings

The following application parameter controls the minimum length of the Wi-Fi user’s pin.

USER_PIN_MINIMUM_LENGTH

Specify the number of digits required for a Wi_fi user pin (range 6 to 20 digits)

Roles Privileges

Menu Location: System Admin > Security > Set Up Roles

The following Role privileges control access within the Wi-Fi scanner.

SCANNER_ADHOC_TRANSFER

Users possessing this privilege will be able to create inter locational stock transfers.

SCANNER_GRN

Operators with this privilege are allowed to process supplier deliveries (goods receipts).

SCANNER_PICKING

Operators with this privilege can process delivery picking runs (which includes scheduled stock transfers, where used).

SCANNER_PUTAWAY

Allows stock to be moved between bays within the warehouse. This process is commonly referred to as putaways.

SCANNER_STOCK_ENQUIRY

Operators with this privilege can use the scanner as a stock enquiry feature this identifying a stocked item by scanning its barcode.

SCANNER_STOCK_TAKE

Operators with this privilege have access to the stock take feature allowing stock to be scanned for use in a comparison process highlighting mismatches between SwanFRSs stock position and items scanned.

User Access

Menu Location: System Admin > Security > Set Up Users

The following user settings allow a user to access the Wi-Fi Warehousing functionality.

For a user to be able to log in to the Wi-Fi scanner application, the Is Scanner User must be set and a PIN specified.

Ensure the Operator is linked to a role which has the appropriate scanning privileges set.

Operation

The Wi-Fi scanning application is a REAL-TIME process, stock is adjusted immediately.

When processing accessory classed goods the batch is immediately split and in some instances should the action be cancelled or reversed it will not be possible to reverse the split leaving two batches with smaller quantities in each. This does not affect SwanFRS’s ability to process such goods, especially with barcodes for accessory items being a group code rather than an individual code such as is used for unique and measured goods.

The operator must enter their username and PIN to gain access to the application via the login page.

Dependent upon configuration, they may be asked to choose their current working location.

image-20260216-133047.png

The main menu offers the following options.

image-20260216-133123.png

To process any option, the operator must have the appropriate privilege.

SCANNER_ADHOC_TRANSFER

Transfer Picking (blue)

SCANNER_GRN

Goods Receipt (green)

SCANNER_PICKING

Delivery Picking (teal)

SCANNER_PUTAWAY

Putaways (amber)

SCANNER_STOCK_ENQUIRY

Stock Enquiry (black)

SCANNER_STOCK_TAKE

Stock taking (red)

Common to all processes, the + symbol, this icon can and should be ignored.

The Plus sign is present for operational reasons and should be ignored.

Clicking shows the ACCEPT and RESET buttons, clicking a second time hides them.

Press the LOG OUT button to return to the login page.

Goods Receipting

This option is used to inform SwanFRS that goods have been received from the supplier and are now ‘in stock’.

  • Purchase Order - Key in or scan the purchase order number being processed.

  • Delivery Note - Key in or scan the delivery note number / reference provided by the supplier (i.e. the code / reference on the supplier’s delivery document) - This is a mandatory field.

  • Bay - Optionally enter the storage location where the goods are to be stored.

    • Defaults to the ‘receiving bay’ for the processing location.

  • Qty - Optionally specify the number of LIKE units being received.

  • Barcode - Key in or scan the barcode of the item(s) being GRN’d.

    • barcodes can be the SwanFRS stock ID, manufacturer's ID, Secondary Barcode / SKU.

Successful scanning of a valid barcode displays the details of the unit on the screen and increments the number of units processed (bottom right).

A list of scanned items builds in the lower second of the screen, which can be scrolled up / down to see.

  • Touching the DELETE button reverses the GRN and moves this item(s) back to on order.

  • After a barcode scan, the cursor repositions back to the barcode field for the next scan.

  • If the bay is to be changed or the quantity adjusted, the operator must touch the appropriate data entry field to reposition the cursor.

  • Select the Purchase order or Delivery note to start a new GRN

  • Touch the BACK option in the header or the HOME to return to the main menu.

Transfer Picking

This option is used to inform SwanFRS of product which is being collated for a move to another location.

This process relates to the collation of a transfer note. The Wi-Fi scanner cannot ‘send’ the note, which remains a back office operation.

  • Transfer Note - Key in or scan an existing transfer note number or leave blank to create a new transfer.

  • Send To - Choose from a list of locations (restricted) indicating where the goods are to be moved to.

    • Access to this field is blocked when processing a previously generated note.

  • Reference - Optionally, enter a reference for the transfer.

    • Access to this field is blocked when processing a previously generated note.

  • Quantity - Defaulting to 1, this specifies the number of units of the barcode being moved.

  • Barcode - Key in or scan the barcode of the item(s) being transferred.

    • barcodes can be the SwanFRS stock ID, manufacturer's ID, Secondary Barcode / SKU.

When creating a new note, if a note already exists for the destination location the operator is given the option to add to the existing note

If an attempt is made to transfer more than the available stock quantity, a warning message is produced when the barcode is scanned and the scan rejected.

If a transfer note for a different ‘send from’ location is specified, a warning note advises and the note number rejected.

If the specified transfer note has already been ‘sent' the following warning message is presented.

When processing a previously started note, the Scan History will only include barcodes scanned this time. Items already on the note from the previous session will not display.

Scanning a valid barcode presents the details of the item to the screen. This ensures the operator can see if the item scanned is correctly labelled.

Control then returns to the barcode field, ready for the next scan.

Accessory Classed Stock

If a single barcode has multiple units , the operator may scan several times or touch the Quantity field BEFORE scanning the barcode, entering the number of units to move.

SwanFRS will immediately split the batch and place the quantity specified on the transfer note.

Measured & Unique Classed Stock

For Transfer purposes, measured goods are processed as Unique items. i.e. 1 barcode 1 unit.

Successful scanning of a valid barcode displays the details of the unit on the screen and increments the number of units processed (bottom right).

A list of scanned items builds in the lower second of the screen, which can be scrolled up / down for review.

  • Touching the DELETE button removes the item from the transfer note.

    • It may not be possible to roll back up the split created when moving accessory classed items.

  • After a barcode scan, the cursor repositions back to the barcode field for the next scan.

  • If the quantity is to be adjusted, the operator must touch the Quantity data entry field to reposition the cursor.

  • To move to a different transfer note, touch the Transfer Note entry point and enter the new details.

  • Touch the BACK option in the header or the HOME to return to the main menu.

There is no requirement to save the note as each action is recorded immediately within the database. Once processing for the note has concluded simply change the note number or return to the menu and select the next action.

Delivery Picking

This option is used to update the stock position and status of the delivery note.

When using advanced deliveries, if all stock items on the note are moved to the picked bay the note status will be updated to LOADED, or if the all stock on the note is now in the designated despatch bay the note status will be updated to DISPATCHED.

  • Pick Note - Key in or scan a delivery run number which has to relate to the trading location stated in the header bar.

  • Quantity - Defaulting to 1, this specifies the number of units of the barcode being picked.

  • Barcode - Key in or scan the barcode of the item(s) being procssed.

    • barcodes can be the SwanFRS stock ID, manufacturer's ID, Secondary Barcode / SKU.

When entering a delivery run number, if a run does not exists, a warning message is produced when and the run number rejected.

If the run number is for an alternative location a warning is displayed and the run number rejected.

If a valid run number (for the processing location) is entered, SwanFRS checks the delivery status of the note and will reject the entry if the note is not in the LOADING status.

The status of the note is displayed below the pick number.

Delivery run status cannot be changed within the Wi-Fi application.

The delivery run, in the LOADING status allows the operator to begin scanning barcodes (and quantities) of items on the delivery run.

If the operator scans a barcode not expected the following warning is produced.

The delivery picking note is a guided pick using the sequence of the delivery note to direct the operator to the next item to be located.

The pick screen is split into 3 sections.

1. Note details / scan area

The operator may change the Pick Note number at any time thus closing activity in the existing pick and moving to the next.

The status of the previous pick is automatically saved.

2. Next item to be found

The next item to be scanned is displayed as a stock ID, the storage area / bay location the stock is expected to be in and the number of units to be picked.

The buttons displayed to the right of the screen change commensurate with the class of the item to be picked.

  • PICKED - for Service classed items this button tells the system item has been loaded onto the run. Service classed stock doesn’t physically exist and therefore cannot be scanned. However it must exist on the run for it to be delivered therefore the operator needs a way of telling the system to proceed. Selecting PICKED marks the order line as ‘loaded’.

  • RESERVE - For accessory classed units, selecting this button tells the system search for the next available stock ID and replace the Stock ID on the delivery run with the ID found.

    As accessory stock items do not carry the Stock ID as a barcode this feature doesn’t impact on operation (Accessory barcodes are either the SKU or the internal secondary barcode held in SwanFRS).

    Where the application replaces one ‘batch number’ with another, the screen updates showing the new IDs however it is still necessary to scan the barcode of the item to tell the picking process the item has been found.

    Reserve differs from Alternative in that the operator cannot choose the alternative stock ID.

  • ALTERNATIVE - When picking unique or measured items this button is displayed.

    If the stock ID cannot be found but an alternative (like-for-like) item is available, selecting this feature allows the operator to scan and alternative barcode.

    The button legend will change to CHOOSE ALTERNATIVE indicating the routine is waiting for a stock ID to be scanned.

    If the barcode scanned doesn’t match the SKU and option / answer combination it will be rejected.

    If the barcode scanned is a true like for like replacement, SwanFRS swaps the stock ID on the delivery run to that scanned and the item is marked as ‘loaded’ within the system.

  • MISSING - This button should be used if the item cannot be located and therefore it is to be ‘skipped’. Clicking this tells the system to move on to the next item to be picked. It is not removed from the delivery run (this can only be done in the back office), in that the routine will return back to the item once other items on the pick list have been processed.

3. Pick History

Once loaded the display will show a screen similar to that shown here.

It is possible to remove an item from the picked list (loaded) by clicking the DELETE button alongside the appropriate item.

This removes the item from the pick history and returns it to the ‘unloaded’ status on the delivery run.

The item will then reappear in the guided pick list.

Completing the pick

There is no requirement to save the note as each action is recorded immediately within the database, once processing for the note has concluded simply change the note number or return to the menu and select the next action.

Dependent upon configuration, once the last item has been picked (marked) as loaded, the status of the delivery run will automatically change to Loading to Loaded.

Putaway

This feature is designed to update SwanFRS with the ‘new’ bay / storage location of stock within a location.

It is not an interlocation transfer - if this is required the Transfer Picking option should be used.

image-20250120-093000.png
  • Bay - Scan or enter the storage location where the goods are to be stored.

    • Defaults to the ‘receiving bay’ for the processing location.

    • Must be a valid bay within the location displayed in blue at the top of the page.

  • Qty - Optionally specify the number of LIKE units being moved

    • Assumes 1 unless otherwise specified.

    • This value cannot exceed the number of items linked to the barcode.

  • Barcode - Key in or scan the barcode of the item(s) held in stock in the ‘operational’ location.

    • barcodes can be the SwanFRS stock ID, manufacturer's ID, Secondary Barcode / SKU.

image-20250120-093301.png

When a barcode is scanned which is in the operational location but NOT in the specified bay, the screen shows the details of the barcode (if recognised) and automatically updates the bay to that selected.

If a barcode is scanned which is not recognised by the routine, is the subject of a transfer or delivery, or if the quantity specified exceeds the known amount, a warning similar to that shown below will be presented.

image-20250120-093840.png

The putaway is rejected with control returning to teh barcode field.

If the barcode scanned is matched against more than one unit, a pick list is presented for the operator to choose which item to ‘move’.

image-20250120-094157.png

At the foot of the display (and visible when scrolled down), is a listing of the stock items moved to the specified bay.

image-20250120-093539.png

This history is cleared when the operator clicks the Back or Home menu options or if the CLEAR button is clicked.

  • Touch the BACK option in the header or the HOME to return to the main menu.

Stock Enquiry

This option is a ‘view’ only mode allowing the operator to view details of a scanned barcode.

image-20250120-094418.png
  • Barcode - Key in or scan the barcode of the item(s) held in stock in the ‘operational’ location.

    • barcodes can be the SwanFRS stock ID, manufacturer's ID, Secondary Barcode / SKU

image-20250120-095015.png

The screen will scroll for items with larger descriptions.

If the routine cannot identify a barcode a warning screen similar to that shown below will be presented.

image-20250120-094755.png

If the barcode scanned is matched against more than one unit a pick list is presented for the operator to choose which item to ‘move’.

image-20250120-094732.png
  • Touch the BACK option in the header or the HOME to return to the main menu.

Stock Takes

This option is designed to allow the operator to collate a list of stock items which can be associated or linked to a stock take, the results are then analysed to identify unders / overs and exceptions relating to stock holding.

image-20260216-133557.png
  • Stock Take - Either select from a pick list of available stock take or choose the ‘free-standing’ data type.

    • if freestanding is selected and there is an earlier freestanding scan present for this device (on that day), the system will ask if scans are to be added to a previous file or if a new freestanding scan file is to be generated.

  • Bay - Scan or key in the bay name being scanned.

  • Quantity - Defaults to 1, specifies the number of identical units relating to the barcode about to be scanned.

    • decimals are prohibited - for measured goods it is the existence of the item not its length that is being recorded and therefore the quantity for measured goods should be 1.

  • Barcode - Key or scan the barcode of the item.

    • barcodes can be the SwanFRS stock ID, manufacturer's ID, Secondary Barcode / SKU.

    • duplicated scans for unique items are blocked but accepted for accessory classed items.

      • for example scanning the barcode of an accessory classed item 5 times produces the same result as entering a quantity of 5 and scanning once.

    • scanning is not possible for service classed units.

image-20260216-134029.png

The screen will scroll for items with larger descriptions.

If the routine cannot identify a barcode a warning screen similar to that shown below will be presented.

Subject to configuration, the cursor will either return to the barcode field where further stock scanning can occur, or the cursor will move to the bay field where a new bay must be entered / scanned before moving on to the barcode.

image-20260216-134125.png

If the barcode scanned is matched against more than one unit a pick list is presented for the operator to choose the item.

image-20260216-134238.png

A history of scans is produced and displayed at the bottom of the screen.

image-20260216-134430.png

Dependent upon configuration items scanned in a different bay to that held within SwanFRS will be automatically moved to the scanned bay.

Subject to configuration, any item identified as being present at a variant location will be automatically transferred to the stock take’s location (and the transfer note completed).

  • Touch the BACK option in the header or the HOME to return to the main menu.

Files from the Confluence page

Attachments (44)

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article